How to use the glass grinding machine correctly to ensure the processing quality?

     Glass edge grinding machine plays a vital role in the process of deep glass processing. It is mainly used for grinding and polishing glass edges, aiming to provide precise and smooth glass edges to meet the needs of glass aesthetics and safety in different occasions. The correct use of a glass edge grinder not only ensures the quality of the process, but also extends the life of the machine. In order to ensure its efficient and stable operation, it is necessary to understand and master the use of the machine and precautions. The following is a detailed description of how to use the glass edge grinding machine correctly:

 

 

1. Operation preparation

Read the instruction manual: before operation, you should read the instruction manual in detail to understand the machine's transmission principle, operation method and maintenance knowledge.

Check the position of the grinding head: make sure the position of the grinding head is correct and the moving gap is appropriate, avoiding the decline of processing precision or machine damage caused by improper adjustment.

 

2. Check before starting the machine

Prepare edge grinding liquid and abrasive: choose the appropriate edge grinding liquid and abrasive according to the processing needs to guarantee the edge grinding effect and efficiency.

Check the working table: Before turning on the power switch, check whether the working table is clean, whether the glass plate to be processed is properly placed and make sure that it is in proper contact with the edge grinding wheel.

 

3. Pay attention to the grinding process

Clamping the glass: Clamp the glass through the front and rear pressure plate, drive its linear movement for grinding, ensure the uniform force of the glass in the grinding process, avoid cracks or fragments.

Adjust the clamping force: the size of the clamping force should be appropriate, too loose to affect the quality of grinding, too tight will increase the load on the machine, easy to produce jitter creep phenomenon, grinding thin glass is also easy to clip broken glass.

 

4.Maintenance of platen guide

Refuelling and lubrication: the combined surface of the front and rear platen and guide rail should be refuelled and lubricated frequently, otherwise the normal service life of the machine will be affected due to the premature wear of the front and rear platen and the guide rail working surface.

Check the lubrication pipeline: even if some models have automatic lubrication device, you should always check whether the lubrication pipeline is smooth.

 

5. Handling after switching off the machine

Clean up the working table: after finishing the grinding edge, turn off the switch of the water grinder, stop the operation of the edge grinding machine, and clean up the debris inside the working table and the machine in time, so as to avoid affecting the next use.

 

6.Regular maintenance

Check the wear degree of grinding wheel: regular maintenance of the edge grinding machine, such as checking the wear degree of grinding wheel, replacing the parts with serious wear, adding lubricating oil, etc., in order to prolong the service life of the machine.

 

In addition, after understanding the above, here are some other suggestions:

● Wear protective equipment: Operators need to wear suitable protective equipment, such as protective glasses, gloves, etc., to prevent the debris generated during the grinding process from causing injury to the body.

● Well ventilated: Keep the workplace well ventilated to help expel dust and vapours from the grinding process and keep the working environment clean and safe.

● Maintenance by professionals: When encountering machine malfunctions or abnormalities, stop the machine immediately and disconnect the power supply, and have it checked and repaired by professionals; you should not try to solve complicated technical problems by yourself.

 

In summary, the correct use of glass grinding machine is the key to ensure the processing quality and long-term stable operation of the machine. Operators should strictly abide by the operating procedures, do a good job of routine maintenance and repair work, while paying attention to safe operation to prevent accidental injury. Through these measures, the precision and output of glass processing can be improved, the service life of the equipment can be extended, and a solid foundation can be laid for the production of high-quality glass products.